Running an ISP network means keeping routers, switches and other network devices running reliably. However, unexpected downtime, bandwidth congestion and device failures can affect connectivity and leave customers frustrated.
For small ISPs, investing in expensive network monitoring systems may not always be practical. Fortunately, you can start monitoring your network using affordable tools that help you track device performance, identify connectivity issues and detect potential problems before they escalate.
In this guide, we'll walk you through the basics of ISP network monitoring, what you should monitor and how to set up a simple monitoring system without stretching your budget.
If you want to develop practical skills in monitoring and troubleshooting ISP networks, explore the ISP Network Monitoring, Troubleshooting & Operations course at Centipid Academy.
What You Need Before Setting Up Network Monitoring
Before installing monitoring software, identify the devices and network components you need to monitor.
These may include MikroTik routers, switches, wireless access points, servers, OLTs and upstream gateways.
Prepare a simple network inventory containing:
- Device name: A name that makes each device easy to identify.
- IP address: The management IP address used to access the device.
- Device type: Router, switch, access point, server or other equipment.
- Location: Where the device operates within your network.
- Role: What the device does and how critical it is to your operations.
You should also have a basic network topology map showing how your devices connect. This makes it easier to identify where a failure occurs when a device goes offline.
Next, prepare a computer or server to run your monitoring software. You do not need expensive hardware for a small deployment, but the machine should have sufficient processing power, memory and storage for the number of devices you intend to monitor.
Finally, ensure your network devices support the monitoring protocols required by your chosen software. These commonly include:
- SNMP: Collects information about device performance, interface traffic, CPU and memory usage.
- ICMP: Checks whether devices are reachable and measures response times.
- Syslog: Collects system logs and event messages from supported devices.
For SNMP, use SNMPv3 where supported because it provides authentication and encryption. If you use SNMPv2c, restrict access to trusted monitoring systems and protect the community strings.
Affordable Tools for ISP Network Monitoring
You do not need an expensive monitoring platform to track your ISP network. Several tools offer the features needed to monitor routers, switches, servers and network performance at little or no software cost.
Here are three options worth considering.
LibreNMS
LibreNMS is an open-source network monitoring platform designed to discover and monitor network devices using SNMP. It supports automatic device discovery, performance graphs, alerts and bandwidth monitoring.
You can use it to monitor MikroTik routers, switches and other SNMP-compatible equipment. LibreNMS runs on Linux and offers a web-based dashboard for viewing network performance.
Best for: Small ISPs looking for a dedicated, open-source network monitoring solution.
Zabbix
Zabbix is another open-source monitoring platform that tracks network devices, servers, applications and services. It supports SNMP monitoring, device availability checks, performance graphs and configurable alerts.
Unlike tools focused mainly on network devices, Zabbix also monitors the health of servers and other IT infrastructure. However, it requires more configuration to get the monitoring environment running.
Best for: ISPs that want to monitor both network infrastructure and server performance from one platform.
PRTG Network Monitor
PRTG Network Monitor offers a graphical interface and guided setup, making it a relatively straightforward option for beginners.
It supports SNMP monitoring, bandwidth tracking, device availability checks and automated alerts. Its on-premises freeware edition supports up to 100 sensors. A sensor represents one monitored aspect of a device, not one entire device. You can therefore use up your sensor allocation faster than expected.
PRTG runs its on-premises monitoring server on Windows. You can start with the free edition and upgrade when your monitoring requirements exceed its limits.
Best for: Small ISPs that prefer a graphical monitoring interface and want to avoid extensive manual configuration.
Which Tool Should You Choose?
Your choice depends on your network size, technical skills and monitoring requirements.
| Tool | Main advantage | Cost |
|---|---|---|
| LibreNMS | Dedicated network monitoring | Free and open-source |
| Zabbix | Flexible infrastructure monitoring | Free and open-source |
| PRTG | Guided setup and graphical interface | Free up to 100 sensors |
For a small ISP, LibreNMS is a good starting point if your main priority is monitoring network devices and bandwidth usage.
Zabbix offers greater flexibility for monitoring additional infrastructure, while PRTG provides a simpler starting experience for Windows users.
Remember that free software does not mean zero operating costs. You still need a machine to run the monitoring platform, storage for performance data and someone to configure and maintain the system.
How to Set Up a Basic ISP Network Monitoring System
For this setup, we'll use LibreNMS as an example. It is a free, open-source monitoring platform that supports SNMP and helps ISPs track network device availability and performance.
Follow these steps to establish a basic monitoring system.
Step 1: Install LibreNMS
Prepare a computer or server to run LibreNMS. You can use a dedicated physical machine or a virtual machine running a supported Linux distribution.
Follow the official LibreNMS installation guide to install the required packages, configure the database and web server, then complete the initial setup.
Once installation is complete, access the LibreNMS dashboard through your browser.
Step 2: Enable SNMP on Your Network Devices
LibreNMS uses Simple Network Management Protocol (SNMP) to collect performance data from supported network devices.
On a MikroTik router, open WinBox, navigate to IP > SNMP and enable the service. Configure the SNMP access settings to allow connections only from your monitoring server.
For production networks, use SNMPv3 where supported because it provides authentication and encryption. Avoid exposing SNMP access to the public internet.
Ensure your firewall allows SNMP traffic from the monitoring server on UDP port 161. Repeat the configuration on other compatible routers and switches.
Step 3: Add Your Devices to LibreNMS
Once SNMP is enabled, log in to LibreNMS and add your network devices.
- Navigate to Devices.
- Select Add Device.
- Enter the device's management IP address or hostname.
- Select the appropriate SNMP version.
- Enter the required SNMP credentials.
- Submit the details to register the device.
LibreNMS will attempt to communicate with the device and retrieve its available monitoring information.
Start with your core router, distribution switches and upstream gateways. Add other devices as you expand the monitoring system.
Step 4: Establish a Performance Baseline
After adding your devices, allow the monitoring system to collect performance data. Check the available graphs and establish normal operating ranges for your network.
Pay attention to bandwidth utilisation, device availability, CPU usage, memory consumption and interface errors.
You should also understand your network's normal latency and packet loss levels. This gives you a reference point when investigating customer complaints or unexpected performance changes.
Do not rely on monitoring dashboards alone. Use diagnostic tools such as:
- Ping: Tests device reachability, response time and packet loss.
- Traceroute: Helps identify where delays or connectivity failures occur along a network path.
- DNS lookup: Checks whether domain names resolve to the expected IP addresses.
- MikroTik Torch: Helps identify traffic flows and devices consuming bandwidth.
- Packet Sniffer: Captures network traffic for more detailed troubleshooting.
You can access these tools through WinBox or the MikroTik terminal. Run tests from appropriate points in your network to narrow down where a fault originates.
Step 5: Configure Alerts and Test Your Setup
Configure LibreNMS to generate alerts when monitored devices become unavailable or performance conditions exceed your defined thresholds.
For example, you can create alerts for device downtime, high bandwidth utilisation and other conditions that require attention.
Test your alerting configuration using a controlled test on a non-critical device. Confirm that the monitoring system detects the event and delivers the notification to the intended recipient.
When an alert occurs, follow a consistent troubleshooting process:
- Confirm the affected device or network segment.
- Check whether the problem affects one customer, multiple customers or the entire network.
- Run appropriate diagnostic tests to narrow down the fault location.
- Record the results before changing any configuration.
- Apply the necessary fix and verify that connectivity has recovered.
Finally, document the incident, including the symptoms, identified cause, corrective action and resolution time. This creates a useful technical record and makes future troubleshooting easier.
What to Monitor and How to Handle Network Alerts
Installing monitoring software is only the first step. You also need to know which metrics to track and when a change in network performance requires action.
For a small ISP, focus on the following areas.
Device Availability and Uptime
Monitor whether your core routers, switches, access points and upstream gateways are online and responding.
Configure alerts to notify you when critical devices become unreachable. Repeated availability failures may indicate power problems, hardware faults, link failures or connectivity issues.
Bandwidth Utilisation
Monitor incoming and outgoing traffic on your network interfaces to identify heavily utilised links.
High bandwidth utilisation can indicate congestion, especially during peak hours. Track traffic trends to identify consistently overloaded links and determine when you need additional capacity.
MikroTik Torch can also help identify which IP addresses or traffic flows consume the most bandwidth.
Latency, Jitter and Packet Loss
Bandwidth alone does not determine network quality. You should also monitor:
- Latency: Measures how long packets take to travel between two network points.
- Jitter: Measures variations in packet delay. High jitter can affect voice and video services.
- Packet loss: Measures packets that fail to reach their destination. It can indicate congestion, poor links or other network problems.
Use Ping and Traceroute to investigate connectivity complaints and identify where delays or packet loss occur.
Device Health
Monitor CPU usage, memory consumption, temperature and interface errors on supported devices.
Consistently high CPU usage may indicate excessive processing load, while memory pressure can affect device performance. Interface errors may point to physical link problems, faulty cables or incompatible configurations.
Monitor these metrics to identify potential hardware or performance problems before they cause service interruptions.
Setting Up Alerts and Responding to Problems
Configure alerts around conditions that matter to your network operations. Examples include:
- A core router or upstream gateway becomes unreachable.
- A network interface goes down.
- Bandwidth utilisation remains above your defined threshold.
- Packet loss or latency increases beyond normal operating levels.
- A device experiences consistently high CPU or memory usage.
Avoid setting alerts without understanding normal network behaviour. Establish performance baselines first, then configure thresholds that reflect your network's operating conditions.
When an alert comes in, investigate before making configuration changes. Confirm the affected devices, check diagnostic results and determine whether the fault affects one customer or an entire network segment.
Record the symptoms, test results, identified cause and corrective action. This creates an incident history that helps your technical team recognise recurring problems and improve troubleshooting.
Build Your ISP Network Monitoring Skills
Setting up monitoring software is only part of effective ISP network management. You also need to interpret diagnostic results, identify congestion, isolate network faults and handle incidents systematically.
The ISP Network Monitoring, Troubleshooting & Operations course at Centipid Academy covers these practical skills, including Ping, Traceroute, DNS diagnostics, MikroTik monitoring tools, SNMP, NOC monitoring and incident reporting.
Start Small and Improve Your Network Monitoring
You do not need an expensive Network Operations Centre (NOC) to start monitoring your ISP network. Begin with your core routers, upstream links and critical network devices. Track their availability, bandwidth utilisation and performance.
As your network grows, expand monitoring to additional devices and introduce more detailed alerts. Review performance reports regularly to identify recurring problems, overloaded links and equipment that needs attention.
If you manage a MikroTik-based ISP, you can also use Centipid Billing's built-in router monitoring to track device availability, CPU usage, memory, uptime and active sessions. The system supports SNMP monitoring, automated alerts and subscriber downtime tracking without requiring a separate monitoring server.
Explore Centipid router monitoring and alerts to see how it works. Remember that monitoring is only useful when you can interpret the information it provides: you need to identify network faults, investigate congestion, interpret diagnostic results and document incidents before and after applying fixes.
Start with the tools and resources available to you. Build a monitoring routine and improve it as your ISP grows.



